Masterson’s Swirl Remover Polish

Description

Masterson’s Swirl Remover Polish is your ultimate solution for swiftly eliminating unsightly swirl marks, scratches, and oxidation from all vehicle surfaces. This cutting-edge swirl remover is meticulously engineered to harmonize with dual-action, rotary, and hybrid polishing machines. Its advanced micro-cutting abrasives make quick work of 2000-2500 grit sanding scratches and bothersome swirl marks.

Whether it’s conventional clear coat, single stage paintwork, or ceramic clear coat finishes, this water-based formula is body shop safe and silicone-free, making it an incredibly versatile choice for professionals and enthusiasts alike. Achieve a brilliantly restored finish by removing moderate swirl marks and blemishes from a wide range of vehicles, from cars and trucks to motorcycles, RVs, aircraft, and marine watercraft. Masterson’s Swirl Remover Polish permanently eradicates defects and imperfections to deliver flawless results, quickly renewing the pristine appearance of your beloved vehicles.

Usage Guidelines:

• Begin by shaking the product thoroughly.
• Optimal results are achieved on a cool surface.
• Work on a manageable 2’x2’ section at a time for precise application.

Dual-Action (DA) Application:

1. Apply 4-5 drops of Swirl Remover Polish onto your chosen pad.
2. To enhance pad performance, prime it with Masterson’s Pad Conditioner Spray.
3. Utilize your DA machine at speed setting 1 for the initial application.
4. Gradually increase the speed to settings 5-6.
5. Work the area with moderate pressure in 2-3 passes until the polish becomes clear.
6. To optimize results, switch to light pressure on the machine.
7. Remove any remaining residue with a clean microfiber towel.
8. Follow up with Masterson’s Clarity Final Polish for a flawless finish.

Rotary Application:

1. Apply 4-5 drops of Swirl Remover Polish onto your desired pad.
2. Boost pad efficiency by priming it with Masterson’s Pad Conditioner Spray.
3. Set your machine speed to 1000-1500 RPM for even polish distribution.
4. With no added pressure, use the machine’s weight to work on the surface in 3-4 passes until the compound becomes clear.
5. For the final pass, adjust the machine speed to between 1200-1800 RPM.
6. Continue working on the area until perfect results are achieved.
7. Eliminate any remaining residue using a clean microfiber towel.
8. For a picture-perfect finish, complement it with Masterson’s Clarity Final Polish.