CarPro CQuartz UK 3.0 Ceramic Coating 30ml Kit

Description

Benefits of CQuartz Ceramic Coating

CQuartz UK 3.0 offers incredible resistance to chemicals, salt, and environmental damage as well as provide excellent UV protection. The high silica-quartz content creates a hard glassy layer across painted or gel-coat surfaces. CQuartz UK adds incredible levels of depth to the paint along with unbelievable water and dirt repellency and a rugged durability measured in years!

Kit Includes:

(1) 30ml bottle of CQuartz UK 3.0 (Use 15ml+/- per coat for an average size car)
(1) CarPro Foam Applicator Block
(5) 4-inch Microfiber Suede Applicators
Features:

Now easy-to-use in a wide range of temperatures!
Protection and gloss superior to that of competitor “professional coatings” but easy to use for all detailers
Extremely high Sio2 quartz content
Deep gloss that lasts!
Easy maintenance with “self cleaning” properties (stays cleaner than other products on the market)
Resistance to wash induced marring, bird dropping damage, stains, high or low temperatures, and traffic film
Repels UV rays, water, oils, dirt, and contaminants
Specifications:

Durability: 2 years or more
Average Thickness: 1~2 Micron per coat
Coverage 15ml per coat +/-
Water contact angle: 110°
Minor filling
Recommended working temperatures: 40F to 100F
Recommended Surfaces:

Paint
Metal
Plastic
Before Application:

For best results, have all surfaces 100% clean and polished to a high level.
Before polishing, decontaminate the vehicle with Iron X iron remover, Tar X tar remover, and detailing clay.
Use CarPro Eraser (panel prep cleanser) to remove all oils and residue from the surface before applying the coating. This is important because residue left on the paint will compromise the durability of CQuartz.
Directions:

Use only with good ambient lighting. You need to see when CQuartz flashes / dries on the surface.
Shake CQuartz UK well.
Wrap a 4″ suede microfiber around the grey side of the included foam applicator block.
Slowly open bottle and drag one line of product across applicator.
Spread across paint in a criss-cross pattern. Try covering an area of two square feet at a time. Attempting larger areas creates a risk of missing spots with imperfect coverage.
Buff off as soon as the CQuartz flashes (within 1-5 minutes depending) using a CarPro No-Lint Ultra Towel.
Be sure to remove all excess residue before moving to the next section.
Switch out the suede microfiber applicators regularly.
30-60 minutes after application is the recommended window to apply CarPro Reload. Wait until next day for Reload if you miss the window.
After Application:

Keep surface dry for at least one hour after application (for best results keep dry 24 hours).
Gently wipe any water off the surface during the first 24 hours.
Avoid detergents and chemicals for 5 days after application.
If it is dry and the air is clean outside then you may park the vehicle in direct sunlight after application to speed the curing.
Precautions:

Do not apply in direct sun or on hot surface
Do not re-use suede applicators
Do not re-use the towels you used to buff off with on paint
Wear hand protection
Wear respiratory protection such as painters mask