Check out the amazing deals on Adam's Polishes products.
11% Off

Adam’s Portable Spotless Water Deionizer

5.00 out of 5
(2 customer reviews)


Do you have hard water spots on your vehicle? Adam’s Polishes in collaboration with On The Go, an American Business, has developed a small compact deionizer unit to provide a large supply of laboratory grade deionized water for a spot free water. This small but powerful unit can be attached to your household water supply to effectively filter up to 1,120 gallons of hard minerals out of your water supply to give you a spot free rinse. Adam’s Portable Spotless Water Deionizer comes standard with a built in bypass valve allowing you the option to wash with standard unfiltered water and then quickly switch to deionized water for your final rinse. This feature will ensure that you get the optimum life span from each bottle.

Please Note this Item is Special Order only- Ships in 10-12 Business Days.
22″ Height x 9.5″ Diameter
Preloaded virgin, high-grade, non-regenerated resin
TDS Meter included
Filter up to 1,120 gallons (@100ppm of TDS) of hard minerals out of water supply
32 lbs
4 Ft. 5/8″ Water Supply Hose
20 lb Resin Refill Kit Available (.50 cubic foot)
Unit will produce water @ a TDS of Zero


Earn up to 14,000 Points.

Add to Wishlist
Add to Wishlist
SKU: N/A Category:


First Time Hook Up Instructions

Step 1: Lube up all four O-rings on the red bypass valve assembly and 90° gray elbows.

Step 2: Screw both sides of the red valve assembly tightly on to the black head.

Step 3: Connect both of the 90° gray elbows tightly to the red bypass valve assembly.

Inlet(female garden hose thread): Downflow Inlet stamped on black head/left side unit facing you

Outlet (male garden hose thread): Upflow Inlet stamped on black head/right side unit facing you

Step 4: Connect source water to inlet and flush the system out for 2-3 minutes.

Step 5: Your unit is ready for use.


-How many gallons will this unit produce?

The capacity of a deionization systems is primarily determined by the Total Dissolved Solids (TDS) in the water source. The TDS can be measured by using the meter provided. The TDS can range from 0 to 1,000 PPM plus but typically will fall between 100-400 ppm across the US.

Example: @ 100 ppm of TDS = 1,120 gallons

– What value of PPM will leave my vehicle with a spot free rinse?

We have provided these ranges over the years:

Excellent level: less than 15 ppm

*Satisfactory range: Greater than 15 ppm but less than 50 ppm

Unsatisfactory level: Greater than 50 ppm

*Depends on coloration of vehicle, degree of stainless and one’s individual acceptance level

– Does this reduce my water pressure?

There is a small pressure drop and should not be noticeable.

– When should I replace the resin in the tank?

An acceptable TDS ceiling will vary from customer to customer and is greatly dependent upon the coloration of the vehicle. Most customers will operate between 20-40 ppm of TDS, mid-thirties seems to be a fairly wide acceptance level. We would recommend the use of the rather accurate digital TDS meter and measure the TDS during your first cycle thus quantitatively obtaining your preferred level.

– Is it safe to drink?

We do not recommend drinking the water.

DI water has all the nutritional value removed
DI has an operating cost generally higher than drinking water
DI tends to have a unique taste and odor
– Can I water my plants with Di water?

You really don’t need purified water for your plants thus we would not recommend.

– Can I run heated water through the Di tank?

The DI has a max temperature of 105 degrees Fahrenheit.

– Can I hook my pressure washer up to the outlet of this Di unit?

Yes, ensure the flow rate of the HPW is within the optimum operating range [0.5-2.5 gpm] of the DI unit and never greater than maximum of 3 gpm for best performance.

– Should I use Di water for my entire car wash?

You can, but many will use only for the final rinse.

– How does a Deionizer work?

“Deionized Water”-Simply said, water flows over porous beads that are positively and negatively charged and the minerals or total dissolved solids are removed. These ion exchange columns are porous beads called exchange resins producing laboratory grade water.

– Will this harm my paint on my vehicle?

No, DI water used to obtain a spot-free rinse has been used for applications including Auto’s/Class A RV’s/Small airplanes/Motorcycle’s/both residential & business windows plus many car washing businesses use this for their final rinse.

– How long is the Tank good for if not used?

The resin has a shelf life of 18 to 24 months.

– What do I do with the used resin once I refill the tank?

The resin is non-hazardous and can be disposed through normal waste disposal processes. Always dispose in accordance with federal, state and local regulations.

– Can I use this with Adam’s Soaps?


– Is DI water safe to go down a drain?


Additional information

Weight N/A
Dimensions N/A


2 reviews for Adam’s Portable Spotless Water Deionizer

  1. 5 out of 5

    Mark (verified owner)

    Great service and fast delivery. It’s too cold to used it now but I can’t wait until spring to try it out.

  2. 5 out of 5

    Carlo (verified owner)

    Worked as expected. Water reading with TDS meter straight from the tap was 187 ppm. After running water through the Adam’s Deionizer, the water reading was 0 ppm.
    I was able to wash my car in the sun without the worry of water spots. I could actually let the car dry in the sun without any water spotting. You have the option to use regular water from the outside tap or run water through the deionzer system just by turning the valves on the Adams system. Very easy.
    Make sure to use the deionizer only on the final rinse of your vehicle in order to extend the life of the resin material inside the system.

Add a review
Adam’s Portable Spotless Water Deionizer