Use of this foaming cleaner is easy! Simply spray a small amount of the foaming cleaner onto the affected area, approximately 1 foot away from the area if possible. Make sure the area is well-ventilated with the doors open or windows down. Next, agitate the area with a water-dampened Edgeless Utility Towel, Interior Scrubbing Mitt, or Cockpit Brush, fully working the cleaner into the surface until the foam disappears. Then wipe clean in one direction with a dry Edgeless Utility Towel to raise the nap of the carpet or upholstery, and allow to dry for a few hours. After the area is dry, vacuum if necessary to remove any dried up cleaner and loosened dirt particles.
Warning: Test in a small area first for color fastness. Do NOT use this product on Alcantara or suede surfaces. For cleaning those materials, use the Adam’s Cockpit Brush to periodically brush and “lift” the material for a like-new appearance. If brushing does not suffice, very lightly spray Adam’s Carpet & Upholstery Cleaner onto an Edgeless Utility Towel, then gently wipe the Alcantara or suede area with the towel.